Standards

	TÜV Cooperation Functional Safety (Home)

Standards

The set of standards used for certification and their publishing date is specified by the report to the certificate. The following list represents a compilation of the most generic standards only.

Advice:

[N1], [N3], [N4.1], [N4.2] are listed only as reason of history and are superseded by [N2]
[N7.1] and [N7.2] are listed only as reason of history and are superseded by [N10.1] and [N10.2]
[N5] is listed only as reason of history and is now superseded by [N11]
[N6.1] is listed only as reason of history and is now superseded by [N12]

[N1]	DIN V 19250 "Fundamental safety aspects for measurements and control equipment"
	Safety requirements according to [N1], [N3] abd [N4.n]:	RC 8	-	highest requirements
		RC 1	-	lowest requirements

[N2]	IEC 61508 "Functional safety of electrical / electronic / programmable electronic systems (PES)"
	part 1 to 7 (2000)
	Safety requirements according to [N2]	SIL 4	-	highest requirements
		SIL 1	-	lowest requirements
[N3]	DIN 19251 "MC Protection Equipment"
[N4.1]	DIN V VDE 0801 "Principles for computers in safety-related systems"
[N4.2]	DIN V VDE 0801 Amendment A1
[N5]	DIN VDE 0116 "Electrical Equipment for Furnaces"
[N6.1]	DIN VDE 0160 "Electronic Equipment used in Electrical Power Installations " (corresponds to prEN 50178) DIN VDE 0110 "Insulation co-ordination for equipment within low-voltage systems; Fundamental requirements"; part 1
[N6.2]	EN 61131 "Programmable Controllers" Part 1; "General Information" Part 2; "Equipment requirements and tests"
[N7.1]	EN 50082-2 "Electromagnetic compatibility (EMC); Generic immunity standard - Part 2: Industrial environment"
[N7.2]	EN 50081-2 "Electromanetic compatibility (EMC); Generic emission standard - Part 2: Industrial environment" EN 55011 "Limits and methods of measurement for radio disturbance characteristics of ISM radio frequency equipment", severity: limit class A
[N8]	DIN IEC 68 / DIN EN 60068 "Basic testing procedures", set of standards Part 2-1 / Cold Part 2-2-A / Dry heat Part 2-3 / Dump heat, steady state Part 2-6 / Vibration, sinusoidal Pat 2-27 / Shock
[N9]	EN 954-1 Safety of machinery - Safety related parts of control systems Part 1: General principles for design
	Safety category according to [N9]	Cat. 4	-	highest requirements
		Cat. B	-	lowest requirements
[N10.1]	EN 61000-6-2 Electromagnetic Compatibility (EMC) - Generic Standards - Immunity for Industrial Environments
[N10.2]	EN 61000-6-4 Electromagnetic Compatibility (EMC) - Generic emission standard - Residential, commercial, and light industry Safety of machinery - Safety related parts of control systems Part 1: General principles for design
[N11]	EN 50156-1 Electrical Equipment for Furnaces Part 1: Requirements for application Design and Installation
[N12]	EN 50178 Electronic equipment for the use in power installations

last change: 2007-07-11

TÜV Rheinland Group
TÜV Rheinland Industrie Service GmbH
Automation - Software - Information Technology (ASI)

Germany:	Heinz Gall	ph: +49-221-806-1790
Germany:	Stephan Häb	ph: +49-221-806-2310
USA:	Joseph Lenner	ph: +1-617-447-6120
USA:	Kevin Eldridge	ph: +1-978-266-9500
Japan:	Joachim Iden	ph: +81-6-6355-5732
China:	Bin Zhao	ph: +85-104 86 10 6566 6660-104

Homepage: http://www.tuvasi.com

TÜV SÜD Group
TÜV Automotive / TÜV Product Service
Automation, Software and Electronics
Ridlerstrasse 65
D-80339 Munich/Germany

Nat. / Internat. :	Jürgen Blum	ph: +49-89-5791-2275
Nat. / Internat. :	Günter Greil	ph: +49-89-5791-2278
USA:	Karen Grantham	ph: +1-858-566-2556
Japan:	Asai Yoshinaho	ph: +81-3-3372-4294
Asia Pacific:	Peerasan Supavatanakul

AHomepage: http://www.tuev-sued.de/rail/maschinensicherheitsbauteile_/_steuerungen